| Downconverter Specifications |
| RF Input Frequency | 3575 - 3600 MHz |
| IF Output Frequency | 551 - 576 MHz |
| Gain | 25 ± 6 dB (-30°C to +60°C) |
| Gain Flatness | 4.5 dB typ., 5.5 dB Max. (-30°C to +60°C) |
| Noise Figure | 6 dB Typ. 7 dB Max. |
| Output | 1 dB Compression Point +10 dBm Min. |
| IMD | (Two tone test at -5 dBm each at the output, 6 MHz spacing) -50 dBc Max. |
| Image Rejection | 55 dB Min. |
| In-Band Spurious | -78 dBm Max. |
| LO Frequency | 3024 MHz ± 50 KHz (-30°C to +60°C) |
| Phase Noise | -65 dBc/Hz @ 100 Hz; -85 dBc/Hz @ 1 KHz; -88 dBc/Hz @ 10 KHz |
| Upconverter Specifications |
| IF Input Frequency | 35 - 60 MHz |
| RF Output Frequency | 3475 - 3500 MHz |
| Gain | 22 ± 5 dB (-30°C to +60°C) |
| Gain Flatness | 4 dB Max. (-30°C to +60°C) |
| Maximum Input Power | 0 dBm |
| Output 1-dB Compression Point | +25 dBm Min. |
| Output Transmit Noise | -105 dBm/Hz Max. |
| Output Spurious/Harmonics (+22 dBm Tx Out) | 50 dBc (From 37-58 MHz input) |
| Output Power Blanking Threshold | -52 ± 5 dBm @ IF Input |
| L.O. Frequency | 3208 MHz ± 10 KHz (-30°C to +60°C) |
| Phase Noise | -65 dBc/Hz @ 100 Hz; -85 dBc/Hz @ 1 KHz; -87 dBc/Hz @ 10 KHz |
| General Specifications |
| IF Connector (Rx out / Tx In) | F-Type, 75 Ohm |
| Tx/Rx IF Return Loss | Tx In: -10 dB; Rx Out: -6 dB Max. |
| DC Supply | 18 to 24 Volts DC (1500 mA @ 22 VDC) |
| TxRx RF Return Loss | - 7 dB Max. |
| Antenna Specifications |
| Gain | 18 dBi Typ. |
| 3 dB Beamwidth | 18.5° Typ. |
| 1st Side Lobe (relative to main beam) | 20 dB Typ. |
| Cross Polarization | -25 dB Max. |
| Mechanical Specifications |
| Dimensions | 13.5 x 13.5 x 3.75 in. |
| Weight | 8.84 lbs. (with mount) |
| Environmental Specifications |
| Moisture | Environmentally sealed |
| Operating Temperature | -30°C to + 60°C |
| Wind | Operational to 50 mph |
