CalAmp's planar array transceivers provide the clean, highly directive radiation patterns demanded by two-way networks, in a small, aesthetically pleasing package that can be used in residential installations.

Specifications*

Downconverter: (Rx)   RF Input Frequency   3575 - 3600 MHz IF Output Frequency   551 - 576 MHz Gain   25 ± 6 dB (-30°C to +60°C) Gain Flatness   4.5 dB typ., 5.5 dB Max. (-30°C to +60°C) Noise Figure   6 dB Typ. 7 dB Max. Output   1 dB Compression Point +10 dBm Min. IMD   (Two tone test at -5 dBm each at the output, 6 MHz spacing) -50 dBc Max. Image Rejection   55 dB Min. In-Band Spurious   -78 dBm Max. LO Frequency   3024 MHz ± 50 KHz (-30°C to +60°C) Phase Noise   -65 dBc/Hz @ 100 Hz   -85 dBc/Hz @ 1 KHz   -88 dBc/Hz @ 10 KHz   Upconverter Specifications: (Tx) IF Input Frequency   35 - 60 MHz RF Output Frequency   3475 - 3500 MHz Gain   22 ± 5 dB (-30°C to +60°C) Gain Flatness   4 dB Max. (-30°C to +60°C) Maximum Input Power   0 dBm Output 1-dB Compression Point   +25 dBm Min. Output Transmit Noise   -105 dBm/Hz Max. Output Spurious/Harmonics (+22 dBm Tx Out)   50 dBc (From 37-58 MHz input) Output Power Blanking Threshold   -52 ± 5 dBm @ IF Input L.O. Frequency   3208 MHz ± 10 KHz (-30°C to +60°C) Phase Noise   -65 dBc/Hz @ 100 Hz   -85 dBc/Hz @ 1 KHz   -87 dBc/Hz @ 10 KHz   General Specifications: IF Connector (Rx out / Tx In)   F-Type, 75 Ohm Tx/Rx IF Return Loss   Tx In: -10 dB; Rx Out: -6 dB Max. DC Supply   18 to 24 Volts DC (1500 mA @ 22 VDC) TxRx RF Return Loss   - 7 dB Max.   Antenna Specifications: Gain   18 dBi Typ. 3 dB Beamwidth   18.5° Typ. 1st Side Lobe (relative to main beam)   20 dB Typ. Cross Polarization   -25 dB Max.   Mechanical Specifications: Dimensions   13.5 x 13.5 x 3.75 in. Weight   8.84 lbs. (with mount) Environmental: Moisture   Environmentally sealed Operating Temperature   -30°C to + 60°C Wind   Operational to 50 mph